New to LPR? Considerations Before You Begin

Wildcat_1

Known around here
Joined
Dec 9, 2018
Messages
2,046
Reaction score
5,861
Location
US
Just remember that thanks to the new VOLT FW that you CAN now set manual focus by profile on a 5241-Z12 as I mentioned HERE. Works really well especially at long focal length or challenging situations
 

9mmkungfu

n3wb
Joined
Apr 25, 2018
Messages
18
Reaction score
5
Could you share your HFW5241E-Z12E settings? I realize every case will be slightly different, but a baseline may be helpful.
 

biggen

Known around here
Joined
May 6, 2018
Messages
2,539
Reaction score
2,765
The Illuminator is the IR light. At least, that is how its worded on my camera.
 

biggen

Known around here
Joined
May 6, 2018
Messages
2,539
Reaction score
2,765
I can when I get home this afternoon. I'm not there at the moment.
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,429
Reaction score
47,550
Location
USA
The big key is to run daytime at 1/2000 shutter and then either force it to night settings B/W 45 minutes before sunset and 45 minutes after sunrise so that it has something to focus on, or use the utility posted on the forums that will set focus within the utility.

I ran mine 24/7 using the nighttime settings until I decided to give that utility a try, so now I run color in daytime with 1/2000 shutter
 

dmgaspari

n3wb
Joined
Aug 5, 2020
Messages
2
Reaction score
1
Location
Denver
That was very educational! I am a newbie. Just set up Blue Iris and 2 POE cameras mounted on the garage a few months ago. Of course I discovered that LPR was completely out of reach with the setup. Your post was very informative and it will save a ton of trial and error when I add LPR as a next step. Thanks so much for sharing!!!
 

vandyman

Getting comfortable
Joined
Jul 24, 2018
Messages
555
Reaction score
1,620
Location
US
Awesome information.
A big THANKS!

Sent from my Pixel 5 using Tapatalk
 

camelian

n3wb
Joined
Oct 3, 2020
Messages
24
Reaction score
3
Location
Austin, TX
How low would you go on night time shutter speed in dark situations?
Here is what I have setup right now because it's quite dark. I'm trying to capture plates on both sides of the road. It does really well on the side closest to the camera obviously, the far side it's still pretty good but little more mixed results.
Screen Shot 2020-11-19 at 10.46.30 PM.pngNear Side.pngFar Side.png
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,429
Reaction score
47,550
Location
USA
Those look good - most run 1/2,000, but some have been able to run slower.

It is a trial and error. Speed of vehicle is a big component of it - the slower the cars, the slower the shutter you can get away with.

At this point, I think you just adjust it until you cannot read them.

Remember - you will not get every plate - there could be a temp tag, rusty plates, dirty, cover over them, etc.
 
Joined
Aug 8, 2018
Messages
7,386
Reaction score
25,889
Location
Spring, Texas
How low would you go on night time shutter speed in dark situations?
Those look good now. But most folks run 1/1000 or 1/2000 such that the only thing you see is plate and lights. You will find the slow shutter of 1/500 works ok now, but add a little more movement/speed or rain/fog into the mix and then you will see that you need faster shutter speed.
 
Joined
Aug 8, 2018
Messages
7,386
Reaction score
25,889
Location
Spring, Texas
I was scouring the photos of your house trying to spot the Z12 to see if it sticks out like a sore thumb (i dont want my house to look too much like a bank bristling with obvious cameras).
I do have a bullet cam that is not hidden. It covers the intersection to give me make, model, color and other info on the vehicles that the LPR cams capture. So it is not zoomed into the street area but gives a wider overview. It is a B5442E-Z4E. It is set at about 26mm focal length and is about the same distance to the intersection as the LPR-E cam. I have seen people walking and looking directly into this cam, so some do notice it.

DSC_4979.JPG
It does a decent job of picking up plates though. Especially if the car is at a near-zero angle. Of course, it is not optimized for night LPR as I want to get the other info on the cars.

InkedINTS.20201017_175016813_1_LI.jpgInkedINTS.20201017_235313013_1_LI.jpgInkedINTS.20201018_063642820_1_LI.jpg

Here you can see in rain at night it does not do a good job of capturing the plate.
INTS.20201129_013303844.1.jpg
 
Top