new IPC-T5442T-ZE tripwire issues

Baldcamman

Pulling my weight
Joined
Jan 7, 2019
Messages
289
Reaction score
126
Location
Georgia
Just updated my dahua 2018 nvr with new dahua nvr. No sd cards installed.
Nvr playback is the problem.
 

Baldcamman

Pulling my weight
Joined
Jan 7, 2019
Messages
289
Reaction score
126
Location
Georgia
I am logging into nvr directly with IE. But to log into cameras I only use IE.
I have had the other system in place working damn good for over 3 years with 16 cameras.
 
Last edited:

The Automation Guy

Known around here
Joined
Feb 7, 2019
Messages
1,377
Reaction score
2,738
Location
USA
Just updated my dahua 2018 nvr with new dahua nvr. No sd cards installed.
Nvr playback is the problem.
Stick an SD card in one of the problematic cameras. First, the camera will record a trigger box on a subject and viewing this raw footage may help figure out why your triggers aren't working as expected. Second, it will let you know if the issues are with the raw camera recordings, or something with the NVR system. You'll still record everything to the NVR, you can just have the SD recordings to compare the two.
 

Baldcamman

Pulling my weight
Joined
Jan 7, 2019
Messages
289
Reaction score
126
Location
Georgia
I have never recorded to sd card but will try.

Nvr does the same skipping around of playback in the search and the ai clips.
 
Last edited:

Baldcamman

Pulling my weight
Joined
Jan 7, 2019
Messages
289
Reaction score
126
Location
Georgia
Also just got DMSS working with new nvr today on my android.
It doesn't appear to have skipping issues on play back on phone.
 

Baldcamman

Pulling my weight
Joined
Jan 7, 2019
Messages
289
Reaction score
126
Location
Georgia
Got home about 45 minute ago and pulled nvr. Reseated hard drives and board connections. It seems to be working as should except renaming cameras on boot up.
I hope it was that easy and it stays stable.
 
Top