I am looking at getting this NVR (DS-7608NI-I2/8P)(8 Port with PoE model) but concerned about the fan noise. I know completely silent is not possible, but how noisy is this unit? It will be placed in a room near a bedroom. Just want to make sure it is not noisy enough to become annoying. If the NVR turns out to be too noisy, are there any fan mods you can do with this unit like those mentioned in this thread?: https://www.ipcamtalk.com/showthread.php/7714-Replacing-Fan-In-Hikvision-DS-7608NI-E2-8P-NVR
New Hikvision NVR DS-7608NI-I2
- Thread starter Dutchie30
- Start date
I'm not sure about the 8P model, but the NI-I2 is not noisy at all. I'm sure you can replace the fans, they're just screwed to the case itself so it's a matter of buying a new fan of the same size and replacing it.
I've used a couple of these NVRs and both are loud enough that I would not put them in a living room, and definitely not a bedroom. Being next to a living space should be OK, especially if you can keep the door closed.
As Dutchie30 said the fans inside look like normal computer fans and it is possible to get better, quieter fans in a variety of sizes.
As Dutchie30 said the fans inside look like normal computer fans and it is possible to get better, quieter fans in a variety of sizes.
Parley
Known around here
The fan on my DS-7608NI-I2/8P is not bad at all but I would not put it in a bedroom. It has a low whirrrr to it. Also as things get warmer the faster it goes. When cool you can hardly hear it.
hi guys i have the 7608ni-i2/8p with built in poe switches
my nvr changes camera settings on its own, is there anyway i can stop this for happening ???
my nvr changes camera settings on its own, is there anyway i can stop this for happening ???
I haven't bought an NVR yet. Since you have had some time with this unit, what you think about the 7608NI-I2?
Thanks
Thanks
Parley
Known around here
I have had no problems with mine. It is an upgrade from the DS-7608NI-E2 which I also have. The fan on mine is pretty quiet but I would not put it in a bedroom.
@Dutchie30 Can you please confirm if your NVR can email motion alerts through gmail? i.e. does it support TLS encryption?
What firmware do you have?
Can you provide screen shots of the firmware menus?
What firmware do you have?
Can you provide screen shots of the firmware menus?
Last edited by a moderator:
I like it, definately worth it.
I'm not sure of it working with gmail, although I remember testing it in the past and believe it worked.
I'm running it with firmware 3.4.62 build 160503. Anything specific you're looking for in terms of menu?
I am very interested for the following
1. if it supports TLS encryption at the email notifications
2. if they have introduced a time scheduled rebooting of the NVR,
3. if the virtual hosting is supported,
4. if telnet access is supported.
1. if it supports TLS encryption at the email notifications
2. if they have introduced a time scheduled rebooting of the NVR,
3. if the virtual hosting is supported,
4. if telnet access is supported.
@Dutchie. Thanks for the screenshots.
According to the first shot, TLS is not supported at this firmware version.
According to the second shot, ssh access is supported.
Check under network for the virtual host.
According to the first shot, TLS is not supported at this firmware version.
According to the second shot, ssh access is supported.
Check under network for the virtual host.
See attached, looks like it supports it.
Attachments
On mine:
TLS not supported, Virtual Host not supported (but others have support so I guess I have an older mainboard or something - thanks Hikvision), SSH supported.
Edit: Mine's an E2
TLS not supported, Virtual Host not supported (but others have support so I guess I have an older mainboard or something - thanks Hikvision), SSH supported.
Edit: Mine's an E2
Last edited by a moderator:
Same. I never had Virtual Host on 3.4.6, 3.4.2 and 3.3.4.
I didn't use 3.4.0 because it was buggy as, well it was very buggy.
Edit: Oh crap, mine's an E2 not an I2. Sorry!
Last edited by a moderator:
Just joined the forum. Looks like great info here!
Apologies for what is probably a horribly noob question, but where are the POE ports? Or does this unit simply connect to a POE switch (along with the rest of the cameras)..? Thanks!
Was trying to PM you, Dutchie30, but it says I need 5 posts first. Boo.
Apologies for what is probably a horribly noob question, but where are the POE ports? Or does this unit simply connect to a POE switch (along with the rest of the cameras)..? Thanks!
Was trying to PM you, Dutchie30, but it says I need 5 posts first. Boo.