NEW DBpower IP CAM cannot work with Blue Iris Ver 4

[CHESTERCHESTER]

I have tried many different configurations and still cannot make it work.

Using ODM ONVIF Device manager I was able to get thefollowing info from the camera:


Brand Name on camera is DBpower

Manufacturer: Happtimesoft

Model Number: IP CAM
Hardware Revision: 1.0
Firmware Revision: 2.4
Device ID: 123456
IP Address: 192.168.0.122:80
RTSP Port: 8554

ONVIF Port: 8000
ONVIF: Enabled

MAC Address: 00-15-01-28-CD-2F

ONVIF Version: 2.42

URI: http://192.168.0.122:8000/

Live Video Steam: rtsp://192.168.0.122:8554/1.3gp

Encoding and Resolution: h264 1280x720


Video Stream work correctly from Device Manager and PTZcontrol.






When Blue Iris Ver 4 Inspection is Run:



HTTP request...

OK

GetSystemDateAndTime...

HTTP 400
Opening port 8999...
GetSystemDateAndTime...
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?

Foscam FI89xx compatible?

Foscam FI9821 V2 compatible?

Foscam FI9821 media port compatible?

RTSP port open?
RTSP port detected!

Done




I setup VIDEO for Blue Iris as follows
IP Address: 192.168.0.122
Http Port: 80

RTSP Port: 8554

ONVIF Port: 8000
Type; Generic
Steam: RTSP/H264/MPG4
Tried video Steams:
/
/1.3gp
/192.168.0.122:8554/1.3gp
BUT NONE WORKED




HELP:



CANNOT GET VIDEO



Any suggestion on different settings?

 

[fenderman]

What error do you see? Double check the username and password.

 

[CHESTERCHESTER]

using the tool ONVIF device manager everything works the IP CAM, so username & password are correct. When setting up with Blue Iris the error message is: RTSP: 415 UNSUPPORTED MEDIA TYPE, NO SIGNAL.

 

[fenderman]

using the tool ONVIF device manager everything works the IP CAM, so username & password are correct. When setting up with Blue Iris the error message is: RTSP: 415 UNSUPPORTED MEDIA TYPE, NO SIGNAL.

Then you are entering the stream incorrectly. Post an image of your path..Post an actual screen shot of the configuration page.