Has anyone had experience with the POE switch from Nelly’s, IPCP-8P2G-AT, an 8 port POE, with 2 gigabit non powered uplink ports, total 10 ports or any other POE switch they sell. Price aside looking for some input/experience with the switches.
I will be receiving my second POE switch from Nelly's today. They are the IP CAM POWER line and they are built like a brick shit house, work well and If a issue happens to come up, somebody answers the phone.Has anyone had experience with the POE switch from Nelly’s, IPCP-8P2G-AT, an 8 port POE, with 2 gigabit non powered uplink ports, total 10 ports or any other POE switch they sell. Price aside looking for some input/experience with the switches.
Where is this SFP port located, from what I see that switch has NO sfp interfaces on it. It does have two 100/1000 uplinks on it.Just what I wanted to hear. So just hookup my cameras to the POE ports and the SFP ports to NVR? Nothing else needed other than cables correct?
Gigabyte is referring to the speed at which data is transferred. It has nothing to do with POE or NOT POE.Thank you looney2ns. I probably should not ask but are, what you call, standard gigabyte ports equal to better than running POE or POE+ to NVR or daisy chaining. The POE ports on this switch are POE+. There are only a few switches like this most, as you know, are just 8 port POE or POE+. You just loose a POE port when connecting to the NVR and two when you daisy change. I’m also talking unmanaged switches here. Thanks