Nelly’s r-series camera won’t show on BI

R

Ricky Bobbie

Young grasshopper
Feb 2, 2018
35
2
Purchased r-series cameras from Nelly’s few months back. Just decided to hook them up but can’t get them to show up on bi. But when I log into the cameras interface, it will show the picture. At my wits end. I even downloaded onvif device manager and it won’t pull up info for them, just that the IP address is there. Any help would be great
 
In Blue Iris did you enter cam's IP address, username and password and click on "Find/Inspect"?
 
You might get some help at the forum Nelly's Security
Or reach out to @Sean Nelson
Or e-mail customerservice@nellyssecurity.com

I think you're wanting the URL for the RTSP stream so you can select the make "Generic/ONVIF" and model "RTSP H.264/H.265/MJPEG/MJPG4" and put in the path manually under video.

EDIT: see my post below, #5
 
Last edited:
Ricky Bobbie said:
Yes, I have done all of that. The problem I believe might be due to nothing being put in the video path section. Nothing tabulates in their
Click to expand...
If no joy from my post #4 above, try this:
In Blue Iris enter cam's IP address, username and password and click on "Find/Inspect" then in "Video", "Path" put in "/ch01/0" and click on "OK".
 
  • Like
Reactions: kccustom and CTRL_ALT_DELETE
Ricky Bobbie said:
Perfect. That worked. Not sure why these cameras are so putsy to hook up. I also have the veri focal one and the ptz function dont on BI
Click to expand...
you dont want the varifocal working in BI anyway, all it can do is cause problems accidentally activating it. Log into the camera, set it the way you want it and leave it.
 
  • Like
Reactions: looney2ns and djernie
fenderman said:
you dont want the varifocal working in BI anyway, all it can do is cause problems accidentally activating it. Log into the camera, set it the way you want it and leave it.
Click to expand...
But let’s say that I do want it to work with BI, is their a way that I’m not configuring correctly?
 
fenderman said:
Yes but there is no practical reason to be able to do this it’s a waste of your time and will only cause problems
Click to expand...
Yes true but one reason I wanted to is because I was installing it at a clients garage with a BI system already going that didn’t have the plug in downloaded on the ancient internet explorer. So i has to pre download it on my laptop and plug the camera into my laptop to do the final setup. Lol it was a whole thing.
 
You must log in or register to reply here.
Top Bottom