I'm starting to get my cameras mounted and I am noticing an issue with the image freezing and jumping when Auto Track starts. I'm using Blue Iris and everything seems fine in live view and recordings except when Auto Track starts, the image freezes and jumps. I can manually ptz and use presets to move the camera and everything works fine but Auto Track instantly kills the camera until it has reset itself back to its starting position. OK, I did some more testing and it seems it does fine with slow movement. The camera that is doing this is located near the road and the movements that are freezing the camera are from a cars. So I decided to walk around in the backyard to see if that camera had the same issue and everything seemed fine until I started jogging. As soon as I started moving faster, the camera image froze. Then just like the front camera, after a few seconds the image came back and since the moving object was gone (me) it set itself back to its starting position. Has anyone else had this issue? Any thoughts on what it might be?