Captain_B
Pulling my weight
I ordered the following items from Andy and need advice on how to properly connect the 2 switches to the NVR and the NVR to my LAN switch (Cisco CBS 110 16T) to maximize performance (bandwidth).
NVR608H-32-XI (Network Ports: 2 (10/100/1000/2500 Mbps Ethernet port, RJ-45))
PFS4226-24ET-240 (Port 25-26: 2 × RJ-45 10 M/100 M/1000 M) and (Uplink Port 25-26: 2 × SFP 1000 M uplink combo)
EmpireTech 10-Port Unmanaged Switch with 8-Port ePoE (Port 9: 1 × RJ-45 10/100/1000 Mbps; Port 10: 1 × SFP 1000 Mbps)
For Equipment reference links:
NVR608H-32-XI
PFS4226-24ET-240
10-Port ePoE Switch
Thank you for your help.
NVR608H-32-XI (Network Ports: 2 (10/100/1000/2500 Mbps Ethernet port, RJ-45))
PFS4226-24ET-240 (Port 25-26: 2 × RJ-45 10 M/100 M/1000 M) and (Uplink Port 25-26: 2 × SFP 1000 M uplink combo)
EmpireTech 10-Port Unmanaged Switch with 8-Port ePoE (Port 9: 1 × RJ-45 10/100/1000 Mbps; Port 10: 1 × SFP 1000 Mbps)
For Equipment reference links:
NVR608H-32-XI
PFS4226-24ET-240
10-Port ePoE Switch
Thank you for your help.
As an Amazon Associate IPCamTalk earns from qualifying purchases.