Hello everyone,
I bought a business and at the shop there are 4 cameras and 1 NVR already installed but they don't work!
I used SADP and it only picked up the NVR so I connected 4 cameras to a POE Switch finally they showed up in SADP Tool. As you can see in the photo below details are:
No Reset Buton on the cameras:
20240814-185658 hosted at ImgBB
20240814-185705 hosted at ImgBB
A few issues I think I having right now:
* My set-up is as below:
Camera <> POE Switch
Router <> POE Switch
DVR (LAN Port) <> POE Switch
Please if someone could guide me in the right direction, it would be much appreciated.
I bought a business and at the shop there are 4 cameras and 1 NVR already installed but they don't work!
I used SADP and it only picked up the NVR so I connected 4 cameras to a POE Switch finally they showed up in SADP Tool. As you can see in the photo below details are:
- DS-7608N-E2/8P => 192.168.1.100 (NVR)
- DS-2CD3345-I => 192.168.254.14 (Camera) (I only plugged in 1 camera at this time)
No Reset Buton on the cameras:
20240814-185658 hosted at ImgBB
20240814-185705 hosted at ImgBB
A few issues I think I having right now:
- If I use SADP to configure the camera, I do not think I can do it because I do not have the password.
- NVR has been reset to its default setting.
- Wrong configuration of IP Addresses.
- Wrong wiring *
* My set-up is as below:
Camera <> POE Switch
Router <> POE Switch
DVR (LAN Port) <> POE Switch
Please if someone could guide me in the right direction, it would be much appreciated.