Is there a setting to enable Blue Iris to record multiple cameras at the same time under motion triggering? I have 4 Dahua PoE cams set to trigger motino and have pre-trigger set on all 4. Or, if this is default, is there something obvious I unintentionally did/undid? Much help would be appreciated.
Multiple recording under motion..?
- Thread starter gbodybilly
- Start date
My apologies - I wasn't clear enough. All 4 cameras do record. I do have an overlap between the cameras' field of view. Camera 1 records with a decent amount of pre-trigger and the overlapping camera 2 picks up once motion is picked up. Camera 1's recording halts at this point while Camera 2 is recording. I'm trying to figure out how I can get Camera 1 to continue recording while the motion is still picked up in the overlapping area in the field of coverage on both Camera 1 and Camera 2.
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408
Oh, ok. You need to setup a camera group and put camera 1 and 2 in the same group. Then in the motion settings you can select trigger camera group. This will trigger the other cameras in the group.
