On my garage eyebrow i have 2 boxes put in for camera mounts. They are standard ceiling light boxes. What is the best way to mount the starlight cams to them? Is there a mount kit or do i need to fab my own kit for it?
Mount HDW5231RP-ZE on electrical box
- Thread starter gto-guy
- Start date
Thx. Any sugestion on what to use? Want to mount it on a flat plate and seal the cable access hole (gromet maybe?)
thanks.
I used this box, only got 1 nights notice they were going to stand up the wall.
RACO 4 in. Octagon Box, 1-1/2 in. Deep with 1/2 in. KO's and TS Bracket (12-Pack)-161SP - The Home Depot
pic shows it when that wall was still on the ground
I used this box, only got 1 nights notice they were going to stand up the wall.
RACO 4 in. Octagon Box, 1-1/2 in. Deep with 1/2 in. KO's and TS Bracket (12-Pack)-161SP - The Home Depot
pic shows it when that wall was still on the ground
Use a strip of aluminum and make a strap. Drill holes to line up with existing two holes on metal box and attach. Then line up camera base with strap and use self tapping screws to mount to strap. Seal camera base with caulking. You can purchase aluminum strips from Lowes or HD.
