- Mar 15, 2018
- 53
- 3
Anyone got this working on 2021 R1?
So i need to setup alarm + email whenever there's a movement at night for specific cam,
I found some tutorials mentioning i need to use input from the cam like this one
But the problem is, out of 5 cams only 1 cam has input, and it has 5 of them, so there are input 1 - 5 when collapsed, while the cam i'm trying to monitor doesn't have input at all.
Is this a bug?
Here's the pic :
So i went ahead and try it without input, with this config
Email notification tested and working
I set the time profile from 23.30 to 05.30, and there was a movement on 05.14 but it didn't send me any email..
Then i try simpler setup, where there's a motion like every 5 mins on "operator" ,
But it's not sending at all!
Motion is already enabled on the "operator" cam, i reduced the sensitivity to 10 but still doesn't help
So what am i missing here?
So i need to setup alarm + email whenever there's a movement at night for specific cam,
I found some tutorials mentioning i need to use input from the cam like this one
But the problem is, out of 5 cams only 1 cam has input, and it has 5 of them, so there are input 1 - 5 when collapsed, while the cam i'm trying to monitor doesn't have input at all.
Is this a bug?
Here's the pic :
So i went ahead and try it without input, with this config
Email notification tested and working
I set the time profile from 23.30 to 05.30, and there was a movement on 05.14 but it didn't send me any email..
Then i try simpler setup, where there's a motion like every 5 mins on "operator" ,
But it's not sending at all!
Motion is already enabled on the "operator" cam, i reduced the sensitivity to 10 but still doesn't help
So what am i missing here?