@
klasipca - thanks for uploading the newer firmware.
As an update, I've tested the new 'Park' feature, which is under configuration tab -> PTZ. The user manual briefly alludes to this feature on pg 36, but refers to it as 'IDLE'. I've verified that the behavior of this feature is to set the camera to the selected 'Action Type' after no command input is received by the camera for 'Park Time' minutes.
Procedure (verbose):
To elaborate on Monica's .doc procedure, here it is with screenshots. Step 1 is to upload the .zip file per instructions in .doc. Screen looks as below:
View attachment 6741
Upload proceeds and progress bar updates:
View attachment 6740
Eventually, you are left with this disconcerting screen:
View attachment 6739
In my case, I left the machine for over 30m and viewed the cam with another browser (clearing the cache) to see if the web page automatically updated and/or the device appeared to reboot. Neither happened within that time.
At that point, I manually rebooted the device via configuration -> system -> maintenance -> reboot.
I then cleared the browser cache and saw that the program version had updated within configuration -> system -> device information.
After viewing the live view tab, I was prompted to install a newer version of the plugin, which I did via web installer. At that point, the control version and web page version also updated within configuration -> system -> device information.
Other Notes:
- This firmware appears to lose the pan and tilt, but not zoom, configurations of previously set presets. Re-setting the presets clears the issue
- If you have an onboard SD card (I have a 32GB), it will destroy any stored files on the SD card (not verified with a separate reader), as well as needing a reformat of the SD card:
View attachment 6742
- It looks like they worked on the playback tab a bit as locally recorded videos can now be watched in entirety (previously it would always unrecoverably terminate playback a few seconds into the clip). Also, it appears the download progress now goes to 100% (sometimes more! ha! Previous behavior would always unrecoverably stall at ~65%), however a local file is still not created. Looks like there's still more work to do on this page but it's progress.
View attachment 6743
HTH