Max rate not saving
- Thread starter dreniarb
- Start date
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,407
Welcome to the forum. You must set the camera fps in the camera. Blue iris simply adjusts to what its receiving.
Thanks. This makes sense.
So I dug deeper and found the setting I need. Under the Record tab I adjusted the "Alt/timelapse framerate" setting to 10. Now it seems to be recording at 10fps. Hoping this saves some hard drive space.
So I dug deeper and found the setting I need. Under the Record tab I adjusted the "Alt/timelapse framerate" setting to 10. Now it seems to be recording at 10fps. Hoping this saves some hard drive space.
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,407
You are doing it incorrectly. Blue iris is now wasting processing power tossing frames. As explained in the help file and in release notes - FPS should be adjusted in the camera. Also keep in mind that fps has no bearing on storage. Its ONLY dependent on BITRATE.
interesting. cpu processing i'm not concerned with as we have quite a bit to spare. but storage space is an issue.
i can't adjust the framerate on the cameras because other people want a 30 fps live view. however for reviewing/long term storage purposes 10 fps is sufficient. i would have thought with it storing fewer frames per second it would therefore not use as much space. this isn't the case though?
i can't adjust the framerate on the cameras because other people want a 30 fps live view. however for reviewing/long term storage purposes 10 fps is sufficient. i would have thought with it storing fewer frames per second it would therefore not use as much space. this isn't the case though?