Lower cover door won't close - HFW5231EP-Z12

T

TXPE

n3wb
Nov 14, 2017
7
0
Texas
I opened the lower cover door to access SD card slot. Now door doesn't align and won't close.

Any ideas on how to fix?
 

Attachments

  • IMG_1498 Z12 door.JPG
    IMG_1498 Z12 door.JPG
    1.1 MB · Views: 28
Probably just a mater of making certain that nothing is in the way inside, and correctly aligning the door.
Is that screw captive, that is won't fall out? If so then you may need to start running in the screw before the door will shut completely.
Don't force anything.
 
The hinge area has some movement. You have to kinda wiggle it back in before you close the cover, I had a couple of goes first time I opened mine.

It needs no force as looney says.
 
As shown in the photo, the door has shifted/moved forward. I had to use a fair amount of force to get the door to slide back down (close the gap) in order for the door to fit back into the recess and allow the screw to be used. The door looks like it has a very slight curve to it now that I've tightened the screw. The door is definitely not right, but at least closed.
 
You must log in or register to reply here.
Top Bottom