Lost a Camera

[Sabot]

I lost one of my cameras: this morning.
I powered cycled the camera a number of times =
I deleted and installed it again = .
I have 4 of these cameras (HoSafe) and ensured their settings are the same. Only this one is doing this =
I tried different Makes and also ran the "Find/inspect" =


Appears in BlueIris to be talking:





I checked the camera directly, it is broadcasting correctly. It appears to be in BlueIris.
I am running Release 4.2.9.3 x64 As of this writing, I am running the current version. Thoughts or suggestions?

 

[bp2008]

Video also is corrupt in the camera's web interface?

Maybe a ribbon cable coming off the sensor is loose.

 

[Sabot]

Here is the live camera's web interface:

It's working just fine.

 

[digger11]

Is the camera really running at 1200x672? Check your image settings in the camera's web interface and make sure you have matched them in the BI camera properties.

 

[Sabot]

Very strange... Both the camera and BI are set 1200x672. I changed both to 1280 x 720 and poof it worked!!! Thank you so much!!!

 

[bp2008]

For what its worth, it usually does no good to adjust the resolution in Blue Iris because BI will auto-change the resolution to whatever the camera actually sends.