Loryta T2831TM-AS sub stream url

[lcam]

Does anyone know the substream url for this camera?

 

[TonyR]

I'd be surprised if it's not:

rtsp://username:password@Camera-IP:554/cam/realmonitor?channel=1&subtype=1

NOTE: two "/" after "rtsp:"

 

[lcam]

I'd be surprised if it's not:

rtsp:/username:password@Camera-IP:554/cam/realmonitor?channel=1&subtype=1

NOTE: two "/" after "rtsp:"

Thanks. I should have been more specific as I needed this for Blue Iris and was able to use "/cam/realmonitor?channel=1&subtype=1&unicast=true&proto=Onvif"

 

[TonyR]

Thanks. I should have been more specific as I needed this for Blue Iris and was able to use "/cam/realmonitor?channel=1&subtype=1&unicast=true&proto=Onvif"

If I had known about BI (I use BI) or you'd posted in the BI forum, I would have suggested you put in the cam's IP, username & password and click on "Find/Inspect" button; BI would have very likely configured it properly for you.

Glad you're up and running!

 

[lcam]

If I had known about BI (I use BI) or you'd posted in the BI forum, I would have suggested you put in the cam's IP, username & password and click on "Find/Inspect" button; BI would have very likely configured it properly for you.

Glad you're up and running!

It leaves the sub profile blank when using the find/inspect for some reason. After manually entering it then it works fine. Thanks for your help.

 

[wittaj]

What version are you on?

While BI does leave it blank, recent updates have the substream as a pulldown.

 

[lcam]

What version are you on?

While BI does leave it blank, recent updates have the substream as a pulldown.

5.4.7.11. I never used the pulldown list but just typed the address in but yes I do have the pulldown and it looks correct. Thanks!

 

[Flintstone61]

All this talk about pulling down stuff out of a substream could make a guy wonder what forum he stumbled into.