Looking for an NVR recommentation

[Ron75077]

Hi,

We have a 11 IPC-HFW5231E-Z camera's outside and 7 Foscam cameras inside and are looking for an Dahua NVR W/POE.

I have looked at the Dahua NVR5242-24P-4KS2, with 24 POE ports this seems to be the right size.
We are open to suggestions on other models, sometimes newer and better is less expensive or the same cost.
We noticed that this supports 320Mbps incoming bandwidth. Is this too much? Too little? How would we know? We understand that settings would impact BW used. Is there a calculator for the amount of bandwidth that a camera uses?

Sorry to create yet another thread on NVR selection

TIA

 

[WA3PNT]

Here's a link to a comparison table that might help.

https://ipcamtalk.com/attachments/nvr-compare2-pdf.25952/

 

[Ron75077]

THANK YOU

 

[PapaBill]

Any comparison sheets for a 32 cam? I remember someone here saying a 32 is just a few dollars more than a 16 so gonna spring on a 32. thanx!

Forgot to mention any word on the 5232? been checking that out.

 

[Ron75077]

Hi,

Any suggested vendors for the NVR's? Looking at either the NVR5224-24P-4KS2 or the NVR5424-24P-4KS2

TIA

 

[PapaBill]

Hi,

Any suggested vendors for the NVR's? Looking at either the NVR5224-24P-4KS2 or the NVR5424-24P-4KS2

TIA

Talk to Andy
He is here.

EMPIRETECANDY

 

[Ron75077]

I purchased the nvr5224-24p_4ks2. Setting it up. It does not find and will not recognize my FOSCAM FI9961EP's. I truth it down's see any model of the FOSCAM...
The initial search only finds Dahau camera's. Any suggestions? Think I have the latest version... System Version:3.215.0000001.0Build Date:2018-03-26

Any suggestions on how to make this work? Is there a driver for FOSCAM camera's somewhere?

 

[PapaBill]

I purchased the nvr5224-24p_4ks2. Setting it up. It does not find and will not recognize my FOSCAM FI9961EP's. I truth it down's see any model of the FOSCAM...
The initial search only finds Dahau camera's. Any suggestions? Think I have the latest version... System Version:3.215.0000001.0Build Date:2018-03-26

Any suggestions on how to make this work? Is there a driver for FOSCAM camera's somewhere?

Saw this link about foscams and someone else was having probs, hope it helps or someone here might be better.

Foscam Forum • View topic - FI9821W V2 Onvif

 

[Ron75077]

I have read this thread. Not a lot of help. The ONVIF tool does not see any of the camera's.
I have a conversation started with FOSCAM. Blueiris finds and sees the FOSCAM camera's