I have this setup. NK88P042 Lechange 8-Channel 4K UHD NVR with 2TB HDD and 4 4K Outdoor Night Vision Bullet Cameras
Here's my situation. The NVR is set to continuous as well as motion recording.
When I go to the recordings in the NVR, all of the motion events are tagged to late and I miss everything. I have to watch the untagged portion before each motion event to see what triggered it.
Here's the odd part.
I have gDMSS Plus, if and only if I click on the apps motion notification (when it comes to my phone) can I get the motion even to play correctly (and it does so perfectly, a few seconds before and after the motion, just like I planned). If I go to recordings in the app and try to view the motion events, I get the exact same problem as with the NVR.
Here are my settings.
anti-dither 0s
post record 10s
pre-record 7s
only one camera is hooked up, still trying to get the bugs out.
Camera is a NK168P083-IPC
NVR is NK88P042-NVR
Here's my situation. The NVR is set to continuous as well as motion recording.
When I go to the recordings in the NVR, all of the motion events are tagged to late and I miss everything. I have to watch the untagged portion before each motion event to see what triggered it.
Here's the odd part.
I have gDMSS Plus, if and only if I click on the apps motion notification (when it comes to my phone) can I get the motion even to play correctly (and it does so perfectly, a few seconds before and after the motion, just like I planned). If I go to recordings in the app and try to view the motion events, I get the exact same problem as with the NVR.
Here are my settings.
anti-dither 0s
post record 10s
pre-record 7s
only one camera is hooked up, still trying to get the bugs out.
Camera is a NK168P083-IPC
NVR is NK88P042-NVR