- Feb 11, 2017
- 10
- 0

I'm sure this has been covered elsewhere in the forum but hopefully someone can help.
I have 6 hikvision cams with an nvr.
4 x ds-2cd2042wd-I
2 x ds - 2cd2342wd-I
I recently upgraded the firmware on all of them to the most recent one. All is working fine.
I tried changing the settings on the cameras to improve the quality. I've done this through the browser when connected remotely (see attached picture), as well as when I connect to the indivudal cameras directly.
My problem is that when I change the quality to 1080p and the frame rate to max etc and have them on main stream, to improve the quality, I have problems connecting remotely via iVMS-4500 (can only get it to work when connected locally). When I connect outside my local connection I can only get the sub stream to show live view. When I change the resolution to 720p main stream (clear) works but there is lagging issues (see attached picture - the car is blurry)
Obviously settings are not the same for everyone but any suggestions would be appreciated for what I'm doing wrong or can change to get it to work better.
Thanks!