Just some local thieves spooked by motion sensor light

Ah, not so bad, IMO. One could easily I.D. the red head in the brown "Ski Patrol - Aspen" pullover. Looks like was going to snap a photo with his phone. :idk:
 
  • Like
Reactions: Flintstone61, looney2ns, sebastiantombs and 2 others
Pretty dark. One not very bright street lamp roughly 40 feet away is the closest source of light. The motion sensor light is 30W LED if I remember correctly.
Here are the settings for the 5442. Lot's of gain.

purpleshoes said:
Hello OP, how dark is the actual scene? I am new to these cameras and my eyes can't determine ambient light prior to the motion lights turning on.
Those cameras look great, and earning each penny it looks like.

Thanks
Click to expand...
 

Attachments

  • ipc.jpg
    ipc.jpg
    73.8 KB · Views: 40
Last edited:
  • Like
Reactions: Steve.L and purpleshoes
copy that. Thanks.
I am so sold on this camera already contacted Andy. I'm still away from home but hopefully i make it home soon.

It looks like a great camera for night.
'preciate your efforts
 
In the UK they're pulling a new trick now - tale an ultrabight flashlight with a narrow focused beam and when the lights come on, shine the torch onto the sensor to trick it into thinking it's daylight so they go off again. The guy with the torch then keeps the sensor lit whilst the others steal from the vehicles.

I haven't tried this but I suppose the answer is either to disable the inbuilt light sensor and attach a separate one protected from a ground based beam elsewhere on the home, or wire 2 sensors in parallel and install them in different places so they can't shine on both at once (would have to check with an electrician to see if this is OK but I can't see why it wouldn't be).
 
  • Like
Reactions: purpleshoes and Parley
Smart thinking. My goal when I get back home is to use home automation and have a rule set to where if the motion sensor is triggered, all the exterior lights (either front part, or rear part) come on and stay on for x minutes....something that makes it so its not too long, but is long enough for someone to say "ah fack it these lights aint gonna go off" and leave. So once its triggered it no longer matters if its daylight or night, they just stay on according to the rule. I am still new to it all, but I'd like to implement that, still trying to decide on all the equipment (sensors, lights, that can all talk to each other via home automation software)
 
CCTVCam said:
In the UK they're pulling a new trick now - tale an ultrabight flashlight with a narrow focused beam and when the lights come on, shine the torch onto the sensor to trick it into thinking it's daylight so they go off again. The guy with the torch then keeps the sensor lit whilst the others steal from the vehicles.

I haven't tried this but I suppose the answer is either to disable the inbuilt light sensor and attach a separate one protected from a ground based beam elsewhere on the home, or wire 2 sensors in parallel and install them in different places so they can't shine on both at once (would have to check with an electrician to see if this is OK but I can't see why it wouldn't be).
Click to expand...


OK I have tried this now. It didn't work against mine as mine latch on for the duration of the timer once activated. I'm guessing there are some out there that don't.
 
  • Like
Reactions: purpleshoes
Probably thieves... but I'm one to just check anything out that looks interesting with no intent to steal. I'd probably be curious about those blue lights and start wondering if they are SMD reel lights, or what, then take a closer look. Could even be curious to see what kind of bike people are riding. Heck, I check out cars in parking lots when it's the first time I've seen that model. Probably look like a creep.
 
  • Like
Reactions: sebastiantombs and purpleshoes
You must log in or register to reply here.
Top Bottom