IVS alert triggered outside the lines

[Hans007]

Hi need some help with the Dahua IVS trigger part as im getting a lot of false triggers.

I have set up these two detections and have set it to human only, but even when a vehicle drives by they are trigged by the shape of a vehicle but also from the lights

 

[JDreaming]

Hi need some help with the Dahua IVS trigger part as im getting a lot of false triggers.

I have set up these two detections and have set it to human only, but even when a vehicle drives by they are trigged by the shape of a vehicle but also from the lightsView attachment 111542
View attachment 111543

Maybe from this angle the camera can detect human face of the driver and triggered the rules of target filter?

 

[sebastiantombs]

Have you shut off simple motion detection, SMD, and enabled IVS?

 

[Fenst]

Hi need some help with the Dahua IVS trigger part as im getting a lot of false triggers.

I have set up these two detections and have set it to human only, but even when a vehicle drives by they are trigged by the shape of a vehicle but also from the lights

It seems to be that recording of stupid (old, casual) motion detection is enabled. Try to disable recording (not detecting!)

 

[Hans007]

Have you shut off simple motion detection, SMD, and enabled IVS?

Yep they were enabled, i have just disabled both motion detection and give it a try. thanks so fare.

 

[SpacemanSpiff]

Also, if you have not done so already, consider performing a IVS/Global set-up calibration

edit: forgot the link - DahuaWiki

 

[Hans007]

Also, if you have not done so already, consider performing a IVS/Global set-up calibration

edit: forgot the link - DahuaWiki

Thanks for that wiki, will give it a try

 

[Hans007]

Have you shut off simple motion detection, SMD, and enabled IVS?

It seem to fixed the problem, thanks you