iVMS-4200.exe[122] error language in device not correct

[bayensf]

Hi and thanks in advance to whom can help.

I have DS-2D2132F-IS camera that I had updated to V5.3.0. It was Multilingual before and ended up in Chinese....Ok I did a re-install to V5.2.5 141201 and also the Arden procedure to have a selection box at the star-up to have English.
What remains is that the camera is still Chinese for iVMS-4200. This is causing also failures with DNS. Cam cannot be looked at from outside the Network.

Whom knows how to fix it?

Dutch native speaking....

 

[whoslooking]

Use the downgrader in my signature or the mtd hack this will resolve your language troubles

 

[bayensf]

Thanks fot your reply.

I did do a back-up before the Firmware update, could the file be usefull?
And just a question, why do we need to use TFTP? When doing it from the Camera GUI it seems to work. When I did it with the TFTP it worked at the beginning, after a while it did not work anymore (yes I tried a lot of different digicap files).

 

[whoslooking]

You should only use the one in the downgrader, and because it is a downgrade not an upgrade you can only use the tftp for it to work correctly.