Hi,
I just installed DS-KV8213-WME1 (firmware V2.1.5 build 200629) doorbell with two monitors DS-KH6320-WTE1.
Outdoor unit is connected through cat6 cable to my NVR DS-7608NXI-K2 for continuous recording along with 5 DS-2CD2047G2-L cameras.
Everything seems to be working allright I am just having problems with sound from my doorbell, it constantly makes strange ticking or clicking sound (2 ticks a second) like an old wall clocks.
I have tried everything but no success. Just did not try to install new firmware, because I do not know which hardware revision of the unit I have (A), (B) or (C), as I do not want to brick it. I have seen that there is available newer firmwares for (B) unit on Hikvision site.
Any ideas?
Thanks
I just installed DS-KV8213-WME1 (firmware V2.1.5 build 200629) doorbell with two monitors DS-KH6320-WTE1.
Outdoor unit is connected through cat6 cable to my NVR DS-7608NXI-K2 for continuous recording along with 5 DS-2CD2047G2-L cameras.
Everything seems to be working allright I am just having problems with sound from my doorbell, it constantly makes strange ticking or clicking sound (2 ticks a second) like an old wall clocks.
I have tried everything but no success. Just did not try to install new firmware, because I do not know which hardware revision of the unit I have (A), (B) or (C), as I do not want to brick it. I have seen that there is available newer firmwares for (B) unit on Hikvision site.
Any ideas?
Thanks