Hello everyone. It's my first post in here, as I moved recently and start having all those goodies as ipcams, nvr, ip doorbell, etc.
I'm having an issue with my Dahua VTO211G-WP. First time I connected it, I could reach it through the 192.168.x.108 address, and configured all I needed, including wifi connection. It worked for a few days just fine.
Then, I connected it to my dahua nvr, and changed the ip of the VTO to one in the range of the nvr network, with nvr ip as gateway and ip in the range of the cams, like 10.x.x.72. It worked like a charm as ip cam. And the wifi was working also, so I could configure it with web admin page.
My problem started when I lost wifi connection. I can still see images through nvr, but the doorbell part isn't working. So, I connected it to a poe switch, and I can see it in my lan, with the ip 192.168.x.108, but cant reach it. The configtool app (windows) can see it also, but with ip 10.x.x.72. With that ip, I still can't reach it, because it isn't in my ip lan range.
Wifi disconnected, wrong ip, made hard reset (pressed 5 times the tamper button of vto. Still no luck.
Help please!!!
I'm having an issue with my Dahua VTO211G-WP. First time I connected it, I could reach it through the 192.168.x.108 address, and configured all I needed, including wifi connection. It worked for a few days just fine.
Then, I connected it to my dahua nvr, and changed the ip of the VTO to one in the range of the nvr network, with nvr ip as gateway and ip in the range of the cams, like 10.x.x.72. It worked like a charm as ip cam. And the wifi was working also, so I could configure it with web admin page.
My problem started when I lost wifi connection. I can still see images through nvr, but the doorbell part isn't working. So, I connected it to a poe switch, and I can see it in my lan, with the ip 192.168.x.108, but cant reach it. The configtool app (windows) can see it also, but with ip 10.x.x.72. With that ip, I still can't reach it, because it isn't in my ip lan range.
Wifi disconnected, wrong ip, made hard reset (pressed 5 times the tamper button of vto. Still no luck.
Help please!!!