Hello house, please lately I have a 20 IP cameras installed few months ago but recently, the ISP changed their subnet which changes the status to offline. I have tried using the NVR to change the IP address of each camera but not working. I don't want to start bringing down the cameras and logging into it manually. I have tried using an independent router between that of the ISP and NVR to see if I create a static section for the NVR and cameras while the other end is for the local IL but not working. Please who can help out?
ISP CHANGED THEIR IP SUBNET
- Thread starter Chivescam Ventures
- Start date
Hmmm... two new users are experiencing the exact same problem... they even describe it all too similar-ly-ly
ipcamtalk.com
ISP changed their Gateway Subnet
IP Address Subnet Change n3wb 5 minutes ago Hello house, please lately I have a 20 IP cameras installed few months ago but recently, the ISP changed their subnet which changes the status to offline. I have tried using the NVR to change the IP address of each camera but not working. I don't want...
^^+1
VERY strange....both from Nigeria, both posts identical, verbatim...
Was it the LAN & gateway IP's in the router that changed? If so, why not log into router and change its LAN and Gateway IP's to same subnet as it was BEFORE ?
Unless the ISP has locked it down, I do it here all the time.
VERY strange....both from Nigeria, both posts identical, verbatim...
Was it the LAN & gateway IP's in the router that changed? If so, why not log into router and change its LAN and Gateway IP's to same subnet as it was BEFORE ?
Unless the ISP has locked it down, I do it here all the time.