My SD49225T-HN PTZ seems to have died. My recordings stop at Sunday March 12th, 1:00 AM exactly. There was a weekly reboot scheduled at that time. Prior to that everything with the recordings were fine, no glitches or issues.
Currently when I plug the cable in, the PTZ portion goes through the startup self-check, I can see the
IR light via my other cameras, but then after the sweep finishes the light goes out and that's all.
The camera never registers a blip on the Dahua DVR, it definitely does not resume the last PTZ position and turn IR back on (so it's not like it's working, and I just don't have communications), but it does show a constant 10-12 watts POE power draw (with the IR light on it's closer to 20). I've tried rebooting it numerous times, tried various combinations of interrupting the boot process, changing ports, etc. etc., but nothing's working...
The camera's mounted very high and it's still winter here, so I can't get to it any time soon - but any thoughts on what's happened, or anything I can try remotely?