Does anybody know how to fix this weird IR filter issue? I spoke to one of the tech guy he said cover the Lens for 10 seconds or reboot the camera, it temporarily fixed it but when camera from night to daylight mode, this keep coming back?
IR issue
- Thread starter panpanbebe
- Start date
SouthernYankee
IPCT Contributor
What make and model camera.
Looks like the ir filter is not clicking in.
Looks like the ir filter is not clicking in.
Last edited:
Looks like the if router is not clicking in.? I have total 7 cameras other 6 are runing fine. it go through NVR, it's Hikvision.
SouthernYankee
IPCT Contributor
Dramus
Pulling my weight
I'm sure that was a typo and he meant to write "filter." By that he meant the IR cut filter. See:
Day/night IP cameras: What is an infrared-cut filter and why do I need one?, for example.
Dramus
Pulling my weight
I covered for 10 seconds does the trick, but only for that one day, next day same issue come back.
Dramus
Pulling my weight
Then ISTM it might be a configuration issue? If you can't find it, I'd try a factory reset, then configure it only so far as you need to to get it visible on your network (i.e.: Just the network config), and see what happens.