stevef22
Getting the hang of it
- Joined
- Mar 7, 2016
- Messages
- 153
- Reaction score
- 31
I just wanted to make a post to help others in the future.
Recently I damaged the end of my connector on IPC-T5442T-ZE Black Camera.
Dahua IPC-T5442T-ZE uses the T568A pin out. Not the B more prevalent method here is US. Originally I had it wired like image IMG_9537.jpg (B). However camera did not turn on. So I made a new end connector for the T568A standard and the camera works!
*The individual cables are much more thin than any CAT4/5/6 I have ever used. Royal pain to get these to slide in correct slots.
Recently I damaged the end of my connector on IPC-T5442T-ZE Black Camera.
Dahua IPC-T5442T-ZE uses the T568A pin out. Not the B more prevalent method here is US. Originally I had it wired like image IMG_9537.jpg (B). However camera did not turn on. So I made a new end connector for the T568A standard and the camera works!
*The individual cables are much more thin than any CAT4/5/6 I have ever used. Royal pain to get these to slide in correct slots.
Attachments
-
12.1 KB Views: 106
-
1.5 MB Views: 117
-
644.9 KB Views: 121
-
270.9 KB Views: 134