IPC-HFW3849T1-AS-PV

[Arnold Lift]

Hello Guys,

i need some advice on how to set the camera to its Maximum FPS. Data Sheet says that that 30fps should be possible with AI disabled. So far only 25fps was the max. that you could select in the ip adress browser settings. If anyone has this camera in use and/or can share some Expertise - you're Welcome.

So far also the live Feed seems always to be bit laggy. Nothing fluent.

No NVR is in use. Solid Internet.

 

[Jomsha]

I think
PAL- 25 fps
NTSC- 30 fps

 

[Arnold Lift]

I think
PAL- 25 fps
NTSC- 30 fps

Damn. You replied faster than i corrected the spelling Error from my Phone

That really did the Trick!

Thank you.

Any Advice on the ghosting issues? Happens night time of course.

 

[Jomsha]

Ghosting at night? You should have shutter of 1/60 or 1/120 if you can. And put the Encoding at highest settings

 

[Arnold Lift]

Shutter goes Up to 1/100.000. i just Set IT to 120. Not sure how to set encoding to the max though?

 

[Jomsha]

Under 'Picture, look for ENCODING

 

[pozzello]

Yes, max out the bitrate if you're maxing out FPS. Also try reducing DNR, as default settings (usually ~50%) can cause 'ghosting' effects...