IPC HDW5231R-ZE

[drewgost]

I was wondering if anyone had any thoughts on the way this image looks, is it the camera or the settings
Settings are close to default.
Thanks, Drew

Main Stream
Encode Mode H.264H
Smart Codec Off
Resolution 1920*1080 (1080P)
Frame Rate(FPS) 30
Bit Rate Type CBR
Reference Bit Rate3328-9472Kb/S
Bit Rate 8192(Kb/S)
I Frame Interval 100(50~150)
Watermark Settings checked
Watermark Character DigitalCCTV

Sub Stream 1
Enable checked
Encode Mode H.264H
Resolution 704*576(D1)
Frame Rate(FPS) 25
Bit Rate Type CBR
Reference Bit Rate 256-2304Kb/S
Bit Rate 1024 (Kb/S)
I Frame Interval 50

 

[catcamstar]

Hi, I would start by setting your iFrame interval to your fps. 30fps is already an upperlimit, especially if you want good quality frames instead of lots of less-quality ones.

 

[looney2ns]

You either need more light, or set the shutter speed faster.

 

[drewgost]

Thanks will setup and report back

Go Sox!!

 

[adamg]

Looks like the long exposure leads to blurring of moving objects/people. Your stream settings are maxed out on bitrate and inefficiency, no way to obtain more image quality there; conversely, tons of room to gain bitrate efficiency.