IPC-HDW3849H-AS-PV-PRO Good or nah?
- Thread starter mosesman831
- Start date
Mine used to say. Mess with it until it breaks then fix it. He was a trash truck driver so had loads of electronics come home to break lol.
So does any IVS rules trip the smart illumination? Also does the MD zones work as well?
bigredfish
Known around here
Does your 3849 have any controls for enabling/disabling Smart Illumination as an attribute/Event linkage for MD/SMD or IVS?
My 4MP doesn’t
I can enable/disable the circus lights and siren directly linked to the IVS rule and MD. But I have no such direct linkage to Smart Illumination…
My 4MP doesn’t
I can enable/disable the circus lights and siren directly linked to the IVS rule and MD. But I have no such direct linkage to Smart Illumination…
bigredfish
Known around here
Won’t be able to tell without movement close in within about 12ft
I see little noise without movement
I see little noise without movement
bigredfish
Known around here
bigredfish
Known around here
bigredfish
Known around here
Now I can add enough white light with external lights to counter much of it.
All depends on what you're going to do.
Mine is only White Lights on when it sees a human,
If I leave a porch light on It will look even better, like any camera
All depends on what you're going to do.
Mine is only White Lights on when it sees a human,
If I leave a porch light on It will look even better, like any camera
bigredfish
Known around here
bigredfish
Known around here
bigredfish
Known around here
FYI FWIW
3449
I just tested the 4MP Smart Illumination again to be certain. It’s easy to falsely associate it with AI enabled
- Smart Illumination enabled for Human
- Day/Night settings to Auto
White LEDs DO come on when I enter the scene for the 60 seconds set.
Smart Ilumination is NOT dependent on any other AI in any way on my FW V3.140.0000000.7.R, Build Date: 2024-10-18
------------------
In mycase, I dont want the white LED's to come on from sunset until about 11pm becasue we are constantly in and out of that door.
So I setup a 3rd Custom Profile for that time slot, where I have Smart Illumination disabled and normal IR mode set
3449
I just tested the 4MP Smart Illumination again to be certain. It’s easy to falsely associate it with AI enabled
- Triple checked that MD/SMD was OFF on camera AND NVR
- Triple checked that IVS is OFF on camera AND NVR
- Smart Illumination enabled for Human
- Day/Night settings to Auto
White LEDs DO come on when I enter the scene for the 60 seconds set.
Smart Ilumination is NOT dependent on any other AI in any way on my FW V3.140.0000000.7.R, Build Date: 2024-10-18
------------------
In mycase, I dont want the white LED's to come on from sunset until about 11pm becasue we are constantly in and out of that door.
So I setup a 3rd Custom Profile for that time slot, where I have Smart Illumination disabled and normal IR mode set
Last edited:
My settings look like this. SMD+MD off. Intelligent lighting with Ivs Trigger.
Attachments
bigredfish
Known around here
Time Plan settings doesn’t control it.
Turn OFF IVS completely on camera AND NVR
This is why I asked the question on my post #25 about settings for IVS and SMD associating them with Smart illumination.
If there was a dependency there would be an Event Linkage setting.
Turn OFF IVS completely on camera AND NVR
This is why I asked the question on my post #25 about settings for IVS and SMD associating them with Smart illumination.
If there was a dependency there would be an Event Linkage setting.
Please show us some person movement from both cams at night...
That is a very useful feature, looking forwards to use it when my TiOC Pro cam arrives in a few days. Just to confirm, ANY IVS rules will trigger the white light IF MD and SMD is off on the latest version?
Does anyone have the latest PV-S5 (TiOC 3.0) versions that can test if this exists as well?
That is also true, does the SMART DUAL LIGHT cameras have that event linkage as well or is it similar to the TiOC Pro camera?