Dear all,
Thank you a lot for this great forum, and I would really be very happy if someone can help...
I contacted the supplier of my IP Camera (Jienuo)), and asked for a new firmware, which they sent me, that is named : General_HZXM_IPC_HI3518C_50H10L_V4.02.R11.20140417_ALL.BIN, I had the manufacturer site thru this
After flashing it, my IP Camera died (have only access to port 23 with a telnet login that is "(none) login:", previously I had no telnet/ftp, and just had the special telnet port at 9527 (admin/nopassword), the firmware was old, from 2016, so I wanted to update it... what a mistake LOL... it was : V4.02.R11.00001510.11010.230300.00000
If you have some tips, to restore it... it would be great, and where I could find the new firmware that was annouced, that is named as zip, 00001510.1ipc50h10lv4.0.r11.zip, the web page was showing as a title/name : "Netsurveillance" (and the brand was "USAFEQLO", model "720P IP Camera").
The mac address of the camera is : 00:12:16:b0:67:1c (seems to be a range owned by "ICP Internet Communication Payment AG")
Thank you in advance, any help is very much appreciated !
TS
P.S.: I tried the most common admin/password, like 1234, 12345, 1234567890, empty password, admin, etc... nothing.
Thank you a lot for this great forum, and I would really be very happy if someone can help...
I contacted the supplier of my IP Camera (Jienuo)), and asked for a new firmware, which they sent me, that is named : General_HZXM_IPC_HI3518C_50H10L_V4.02.R11.20140417_ALL.BIN, I had the manufacturer site thru this
Code:
https://www.xiongmaitech.com/en/index.php/service/down_detail/13/69After flashing it, my IP Camera died (have only access to port 23 with a telnet login that is "(none) login:", previously I had no telnet/ftp, and just had the special telnet port at 9527 (admin/nopassword), the firmware was old, from 2016, so I wanted to update it... what a mistake LOL... it was : V4.02.R11.00001510.11010.230300.00000
If you have some tips, to restore it... it would be great, and where I could find the new firmware that was annouced, that is named as zip, 00001510.1ipc50h10lv4.0.r11.zip, the web page was showing as a title/name : "Netsurveillance" (and the brand was "USAFEQLO", model "720P IP Camera").
The mac address of the camera is : 00:12:16:b0:67:1c (seems to be a range owned by "ICP Internet Communication Payment AG")
Thank you in advance, any help is very much appreciated !
TS
P.S.: I tried the most common admin/password, like 1234, 12345, 1234567890, empty password, admin, etc... nothing.
Last edited: