I broke BI !!?! camera stop working

Killer Kool

Killer Kool

Young grasshopper
Mar 27, 2015
70
2
Hello ,

I am moving my post from hardware to Blue iris- Its I believe an BI issue.

Original camera was a dbpower c754....Camera has been working fine for several months.

Camera video stoped.. I can login into IE and view camera fine but BI it does not have video!!..when I do find/inspect these are the results:

Opening port 88...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2017-06-04T23:04:29.000Z
Requesting device information...
Manufacturer: oem
Model: xseries
FirmwareVersion: 00.01.01.0040

GetCapabilities...
Bad response
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done

The make turns to "generic" RSTP H.264/h.265/mjpg/mpge4

still no picture... I originally had it set to port 80,same issue...

I reselect correct camera dbpower c754 still no video

The password is correct.



I figured camera must be bad

I then replace camera....to a deebol 754 (same x series camera)...

Still Blue irris doesnt like it...what the heck am i missing?


Release 4.5.7.2 x64

These camera were operational at one time- something changed. I figured the camera when bad - so I replace it with a similar camera (deebol xseries) that camera acts completely the same -

Concerned with ...
(FirmwareVersion: 00.01.01.0040

GetCapabilities...
Bad response)

The 'Bad response" is that the issue?
 
Last edited:
Step 1, stop buying crap cameras..
Step 2.. if you can view the camera via browser but not in BI you have a settings issue..dont use find inspect...check ports, ip addresses, user/pass.
 
The DBpower/AMOvision cameras are crap. They will eventually die off and give you headaches. Don't install them for your customers if you plan on keeping them.
 
I have over 18 ip camera connected correctly thru BI.......This camera worked with the exiting configuation...then just stopped So i replaced it with another one (simular model).... all ports are correct and have checked user name and password.... Doesnt Find inspect validate the user name and password? I believe it also indicating it can see the ports.
 
fenderman said:
Step 1, stop buying crap cameras..
Step 2.. if you can view the camera via browser but not in BI you have a settings issue..dont use find inspect...check ports, ip addresses, user/pass.
Click to expand...

all ports are correct and have checked user name and password.... Doesnt Find inspect validate the user name and password? I believe it also indicating it can see the ports.
 
Killer Kool said:
all ports are correct and have checked user name and password.... Doesnt Find inspect validate the user name and password? I believe it also indicating it can see the ports.
Click to expand...
See my post above...
what have you dont to check/test...can you view the camera via browser?
 
Opening port 88...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
Requesting device information...
GetCapabilities...
Bad response
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done

above with correct username password......
if its wrong i get.....

Opening port 88...
HTTP Get / request...
Unauthorized, check user/password
Opening port 88...
ONVIF GetSystemDateAndTime
Requesting device information...
GetCapabilities...
Bad response
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
 
fenderman said:
there were other suggestions made...
Click to expand...
okay...checked ports...changed port.....ip and user
Step 1, stop buying crap cameras..
Step 2.. if you can view the camera via browser but not in BI you have a settings issue..dont use find inspect...check ports, ip addresses, user/pass.

short of buying crap camera...
 
Killer Kool said:
okay...checked ports...changed port.....ip and user
Step 1, stop buying crap cameras..
Step 2.. if you can view the camera via browser but not in BI you have a settings issue..dont use find inspect...check ports, ip addresses, user/pass.

short of buying crap camera...
Click to expand...
First confirm that the camera actually supports rtsp or onvif...if it does this is a setup error...you say you checked ports but that is meaningless unless you know what you are doing...post images of camera network and blue iris video settings.
 
so I will try to go back to port 80......I originally tried the blue iris find/inspect as stated in that link -xseries actually populates when blue iris does a find/inspect....i wiil re set up and post

thanks
 
You must log in or register to reply here.
Top Bottom