Huisun 4x Mini PTZ

[Promod117]

Decided to give this a quick color job. Disassembly was pretty easy. Used a little silicone grease on all the o-rings. Just make sure you mark one set of the motor wires and connector. The color codes are the same. You'll know if you switched them as soon as it starts the POST.

 

[ruppmeister]

Looks good


Sent from my iPhone using Tapatalk

 

[bob2701]

Very nice job.

 

[klasipca]

Cool! Is that 4x and all the parts there on the 1st picture except body?

 

[Promod117]

Cool! Is that 4x and all the parts there on the 1st picture except body?

Yes, 4x. With the exception of the staple and twist tie, those are the guts!

 

[Imerten]

Nice job. Love the color!

 

[Q™]

How many screws were left over after you put it back together?

 

[Promod117]

None, but there were a couple of extra boards and wires.

 

[fbnoise]

Pro, A+. I love this install, how it blends and the cool location of the cam. Good job man

 

[tygger]

Were you able to squeeze all the wires into the arm?

 

[Promod117]

Were you able to squeeze all the wires into the arm?

Yes. It took a little doing and I'm not looking forward to pulling them out, if the need were to arise!

 

[boandgo]

nice job.