I upgraded the FW on my Dahua cam beginning of August. It is placed in a summerhouse connected to a mobile 4G router and I noticed after a few days that the included capacity (10GB) in the 4G subscription already was used, even if I had only a few times accessed the camera outside the LAN. From the internet provider, I can see the network is burning approx. 60 MB / hour.
I am pretty sure it's the camera flooding the network with traffic, since monitoring my three Rasperry PI servers does not show anything suspicious (I use iftop for bandwidth monitoring tool) and when I (remotely) switch off the POE plug to the DAhua camera the network traffic stabilizes.
I dont have the exact details of the FW I used, but guess it was Version 2.6-something.
Does anybody else experience the same?
Previously the following FW was installed:
Device Type IPC-HFW1320S
Software Version 2.400.0000.15.R, build: 2015-08-30
WEB Version 3.2.1.291804
ONVIF Version 2.4.2
I am pretty sure it's the camera flooding the network with traffic, since monitoring my three Rasperry PI servers does not show anything suspicious (I use iftop for bandwidth monitoring tool) and when I (remotely) switch off the POE plug to the DAhua camera the network traffic stabilizes.
I dont have the exact details of the FW I used, but guess it was Version 2.6-something.
Does anybody else experience the same?
Previously the following FW was installed:
Device Type IPC-HFW1320S
Software Version 2.400.0000.15.R, build: 2015-08-30
WEB Version 3.2.1.291804
ONVIF Version 2.4.2