Hubitat and Blueiris

B

buckfast

Getting the hang of it
Nov 24, 2016
142
18
It appears as though Hubitat is fast gaining momentum on the home automation scene as a do it all Hub. I have searched the forum and cannot locate much info on integration with Blueiris and if this is even possible.

Does anybody know if BI can talk to the Hubitat hub?

thanks
 
  • Like
Reactions: Mike
I use the following with HA. If you can use mjpeg stream but you need to allow your Hubitat hub IP address to get stream without user/password within Blue Iris, then something like this with my cam named FrontDoor:


Also, check out Hubitat forum:
community.hubitat.com

[Deprecated] BI Control - Local Blue Iris control

Introducing 'BI Control' This app is designed to work locally with Blue Iris security software. Note: This was written for BI4. If using BI5 results may vary. This app has been merged into Event Engine - Automate your world with easy to use Cogs. Rev up complex automations with just a few...
community.hubitat.com community.hubitat.com
 
Last edited:
  • Like
Reactions: buckfast and aristobrat
buckfast said:
where do you place that address within Hubitat?
Click to expand...

Check out second post in the thread below. Add tile to your dashboard. For the tile type, leave the device blank and choose the Video Player Template. Then use the URL from Blue Iris (i.e. http://BlueIrisIP:81/mjpg/FrontDoor/video.m3u8), note that you will need to go into BI and add your Hubitat IP address to the list of devices that can access BI without a username/password (See BI Settings, Web Server Tab, Advanced, Authenication.... and read Help for the dialog).

community.hubitat.com

Access IP Camera using RSTP URL

Hi All; After spend hours trying to find something on the forum regarding this I have to ask you: Is there any way to see on my dashboard the video stream of my ip camera using RSTP URL? Sorry the lack of details... I just discovered RSTP protocol right now. I can tell you I see my cameras...
community.hubitat.com community.hubitat.com
 
Last edited:
  • Like
Reactions: buckfast
thanks. I have managed to get an image to appear that will refresh every 1 second. No such luck with the video feed.
 
If you click on the image, does it come up in it's own window with live view? In HA, that is way it works. Get a refresh of image every 10 seconds, but can click on it and see live view. Hubitat is fairly new, so maybe in the future they'll improve on it.
 
  • Like
Reactions: buckfast
when I click on the image it just brings up a larger image. Although, I have it setup to be an image, not a video stream as the video stream doesn't show anything at all.
 
Got it sorted now. Worked when using mjpg and also in BI authentication settings I had to allow all LAN connections straight through access. I had several IP addresses added individually of all devices (including HE) on my network setup but that didn't work. Don't know why. But I'm happy now that it is solved thanks to you!!
 
  • Like
Reactions: concord
Good to hear. I forgot to add the BI web server port to the mjpg address for the cams, went back and added the default port :81 to my posts, just in case someone else is looking to do something similar.
 
  • Like
Reactions: buckfast
EDIT: All is working fine again. I am not sure what happened but strongly suspect finger trouble on my part. I will try increase attention to documenting the scenario if things go wrong.

Thanks again! Very excited about this Hubitat System! (And BI of course!)
 
Last edited:
You must log in or register to reply here.
Top Bottom