How to set time on Dahua 5216?

[somewhereintexas]

I know this should be easy, but I can't figure it out. How do I set the time on the NVR? Thank you.

 

[cryptelli]

Setting the time can be done from the Web Interface, SmartPSS and directly on the NVR. Once you are logged in simply select Setting > System > General > Date & Time.

 

[Solar Deity]

This should point you in the right direction:

Troubleshoot/NVR/Troubleshoot Date and Time - Dahua Wiki

SD

 

[somewhereintexas]

Thank you.

 

[somewhereintexas]

Setting the time can be done from the Web Interface, SmartPSS and directly on the NVR. Once you are logged in simply select Setting > System > General > Date & Time.

Thank you. Not sure how I missed that!

 

[somewhereintexas]

Thank you. Not sure how I missed that!

One other question: How do I access the Dahua 5216 via the Web Interface? I assume I need to enter the NVR's ip address in my browser, but I am not sure what it is. Thanks again.

 

[cryptelli]

I assume I need to enter the NVR's ip address in my browser, but I am not sure what it is. Thanks again.

Yes. You could try using Dahua's ConfigTool to identify the IP of the NVR.