How to select 12mm lens size on DS-2CD2T42WD-I5 or DS-2CD2T42WD-I8

[Kent Smith]

(I haven't found this in the forum after searching, but couldn't figure out how to do a logical AND for the search string so maybe that is my problem.)

I am considering adding the DS-2CD2T42WD to my test setup of cameras and I want this one to be 12mm. Looking at the datasheet I see the -I5 has 4/6/12 and the -I8 has 6/12/16, but does that mean you can order one of those lenses in that model, or it comes with all three of those lenses?

If I order a -I8 do I still need to select the lens? And if that is true, what is otherwise different between the -I3, -I5, and -I8?

If it comes with all the lenses listed, I have no problem opening it up and changing it out.

 

[cruunnerr]

...but does that mean you can order one of those lenses in that model, or it comes with all three of those lenses?

You can order just ONE of these lens per model

If I order a -I8 do I still need to select the lens?

Yes

And if that is true, what is otherwise different between the -I3, -I5, and -I8?

IR range 30meters, 50meters and 80meters as its wrote here in the end: http://overseas.hikvision.com//uplo...SeriesR6(2X22FWD2X42FWD)DS2CD2T42WDI3I5I8.pdf

 

[cruunnerr]

Dont know if its possible to change the lense as its a normal M12 lense mount. You might have a look at this: http://www.m12lenses.com/M12-Mount-Mega-Pixel-Lenses-s/21.htm

 

[Kent Smith]

Thanks Cruunnerr. I may need to investigate that direction.