It says that I need to make shorrt circuit, how can I do that? I really don't have an idea because I am new to this. Thank youTry this link plenty of information:
DahuaWikiView attachment 86433
Sent from my iPhone using Tapatalk
Thank you broA short circuit is where you apply a temporary thin wire to make contact at the IP camera circuit board to reset the camera. Attached is a detailed info on how exactly to reset your camera.
Dahua IPC-HFW4431R-Z Factory Reset - Network Camera Tech
Here is what you need to do in order to reset your Dahua IPC-HFW4431R-Z camera back to factory default settings. This is the only way to recover from a forgotten administrator password, and while thisnetworkcameratech.com
Sent from my iPhone using Tapatalk
All the ports on the switch is fine so maybe the camera cable itself has a problem and I stop checking because they buy a new one. but thanks a lot for answering me!Try setting your camera IP address ( network ) from DHCP to STATIC for starters, by doing so you'll have a permanent address. If the camera keeps disconnecting make sure you have poe switch that can support your camera or 12v power adapter. Try a different port or ethernet cable like you mentioned.