How to get stream from a chinese model AK3918E V300

[SuperCed]

Hi everyone!

I don't know if I post on the right section.

I bought this webcam fro a while. I am able to see the stream via i-cam software on Android.

11.37US $ |Caméra de Surveillance extérieure IP WiFi HD 2.0MP 1080P, dispositif de sécurité sans fil, étanche, avec Vision nocturne | AliExpress

Achetez malin, vivez mieux! Aliexpress.com

fr.aliexpress.com

But I want to get stream in order to save the stream on a disk.

Do you know how I can connect to this model and get stream from it ?

It's a AK3918E V300 processor. I don't have a lot of information.

Thanks a lot!

 

[SuperCed]

I found the IP and some opened TCP ports, but I cannot access them...

Starting Nmap 7.91 ( https://nmap.org ) at 2021-08-10 11:38 CEST
Nmap scan report for 192.168.1.70
Host is up (0.011s latency).
Not shown: 65532 closed ports
PORT STATE SERVICE
32761/udp open|filtered unknown
61630/udp open|filtered unknown
62638/udp open|filtered unknown
MAC Address: AC:5D:5C:FB:A1:E9 (Fn-link Technology Limited)

Nmap done: 1 IP address (1 host up) scanned in 34.03 seconds

 

[TonyR]

Specs say "ONVIF optional", maybe that means you can log into the cam's embeded webGUI with its IP address and "enable" then "save" ONVIF setting.
If so, then download, install and run ODM, use ODM to log into cam with the same user/pass, click on "Live video" at lower right and look for RSTP URL.
Copy that URL into clipboard.
Download, install and open VLC, go to "media"=> "open network stream", paste the URL into VLC and hit enter.
Report back.

 

[SuperCed]

arg, when I try to go to

http://192.168.1.70/

I get a timeout.
I think there is no accessible webGUI...
And worse, I don't have any Windows system here, I have some MacOS X, Linux (raspbian), Android and iOS only. So it's difficult to make ODM work. Maybe I'll try with Darwine (MacOS version of Wine).
I don't know what's the camera's login since I used a sound authentification when I connected the camera with my phone. I use i-Cam software on Android.

Thanks a lot to try to help me !

 

[TonyR]

You could also put Fing on your smartphone, get on the same wireless LAN as the cam, open Fing and perform a scan, when it finds the cam click on it and scan for an open port....

 

[SuperCed]

Hi, I tried to nmap the cam in order to find some opened TCP or UDP port with no luck.

I had better luck once when I was watching the cam via i-cam app and scanning ports and I found these opened ports :
Starting Nmap 7.91 ( https://nmap.org ) at 2021-08-10 11:38 CEST
Nmap scan report for 192.168.1.70
Host is up (0.011s latency).
Not shown: 65532 closed ports
PORT STATE SERVICE
32761/udp open|filtered unknown
61630/udp open|filtered unknown
62638/udp open|filtered unknown
MAC Address: AC:5D:5C:FB:A1:E9 (Fn-link Technology Limited)

Nmap done: 1 IP address (1 host up) scanned in 34.03 seconds

But I did nor find any http/https interface...
I tried to open via VLC (rts/udp) but I got no result.