How to get stream from a chinese model AK3918E V300

SuperCed

n3wb
Joined
Mar 20, 2022
Messages
4
Reaction score
2
Location
Grenoble
Hi everyone!

I don't know if I post on the right section.

I bought this webcam fro a while. I am able to see the stream via i-cam software on Android.

But I want to get stream in order to save the stream on a disk.

Do you know how I can connect to this model and get stream from it ?

It's a AK3918E V300 processor. I don't have a lot of information.

Thanks a lot!
 

SuperCed

n3wb
Joined
Mar 20, 2022
Messages
4
Reaction score
2
Location
Grenoble
I found the IP and some opened TCP ports, but I cannot access them...

Starting Nmap 7.91 ( https://nmap.org ) at 2021-08-10 11:38 CEST
Nmap scan report for 192.168.1.70
Host is up (0.011s latency).
Not shown: 65532 closed ports
PORT STATE SERVICE
32761/udp open|filtered unknown
61630/udp open|filtered unknown
62638/udp open|filtered unknown
MAC Address: AC:5D:5C:FB:A1:E9 (Fn-link Technology Limited)

Nmap done: 1 IP address (1 host up) scanned in 34.03 seconds
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
16,436
Reaction score
38,154
Location
Alabama
Specs say "ONVIF optional", maybe that means you can log into the cam's embeded webGUI with its IP address and "enable" then "save" ONVIF setting.
If so, then download, install and run ODM, use ODM to log into cam with the same user/pass, click on "Live video" at lower right and look for RSTP URL.
Copy that URL into clipboard.
Download, install and open VLC, go to "media"=> "open network stream", paste the URL into VLC and hit enter.
Report back.
 

SuperCed

n3wb
Joined
Mar 20, 2022
Messages
4
Reaction score
2
Location
Grenoble
arg, when I try to go to I get a timeout.
I think there is no accessible webGUI...
And worse, I don't have any Windows system here, I have some MacOS X, Linux (raspbian), Android and iOS only. So it's difficult to make ODM work. Maybe I'll try with Darwine (MacOS version of Wine).
I don't know what's the camera's login since I used a sound authentification when I connected the camera with my phone. I use i-Cam software on Android.

Thanks a lot to try to help me !
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
16,436
Reaction score
38,154
Location
Alabama
You could also put Fing on your smartphone, get on the same wireless LAN as the cam, open Fing and perform a scan, when it finds the cam click on it and scan for an open port....
 

SuperCed

n3wb
Joined
Mar 20, 2022
Messages
4
Reaction score
2
Location
Grenoble
Hi, I tried to nmap the cam in order to find some opened TCP or UDP port with no luck.

I had better luck once when I was watching the cam via i-cam app and scanning ports and I found these opened ports :
Starting Nmap 7.91 ( https://nmap.org ) at 2021-08-10 11:38 CEST
Nmap scan report for 192.168.1.70
Host is up (0.011s latency).
Not shown: 65532 closed ports
PORT STATE SERVICE
32761/udp open|filtered unknown
61630/udp open|filtered unknown
62638/udp open|filtered unknown
MAC Address: AC:5D:5C:FB:A1:E9 (Fn-link Technology Limited)

Nmap done: 1 IP address (1 host up) scanned in 34.03 seconds

But I did nor find any http/https interface...
I tried to open via VLC (rts/udp) but I got no result.
 
Top