how to get Amcrest NVR working with Reolink 810A?

[tung256]

plugging it in the back of my amcrest nvr NV2108E-HS 8CH PoE does not work.
so i plug the camera onto my network, and powered it via POE injector.
rtsp:/admin:mypass@192.168.1.76/h265Preview_01_main works. the image is super clear but it lags horribly. my network is very fast so i am sure it's not the network.
the amcrest sees the camera as ONVIF but again, it lags horribly, not real time.
has anyone gotten it to work?

 

[wittaj]

Return the reo if you can. They don't play well with non-reo equipment...

 

[TonyR]

+1^^.
If unable to return, what are your bit rates and frame rates?
Log into cam and try 10 & 10 and see if any better.
Can cam be set to H.264?

 

[tung256]

Return the reo if you can. They don't play well with non-reo equipment...

yeah, i notice. these are leftovers from a project. thought i can use them in my own home.

 

[tung256]

+1^^.
If unable to return, what are your bit rates and frame rates?
Log into cam and try 10 & 10 and see if any better.
Can cam be set to H.264?

in my amcrest nvr, it can only encode 264 for the reolink. but 264 and 265 is available for the Lorex cams.

this is what i currently have when i log into the Reolink:

 

[tung256]

ok. i just changed firmware. now running Firmware Version v3.0.0.117_20110414
RTSP is silky smooth at 4K! rtsp:/admin:mypass@192.168.1.76/h265Preview_01_main

BUT ONVIF is still terrible on the amcrest nvr. anyway to get RTSP feed into the amcrest nvr???

 

[mat200]

ok. i just changed firmware. now running Firmware Version v3.0.0.117_20110414
RTSP is silky smooth at 4K! rtsp:/admin:mypass@192.168.1.76/h265Preview_01_main

BUT ONVIF is still terrible on the amcrest nvr. anyway to get RTSP feed into the amcrest nvr???

Hi Tung256

Do you have both the Amcrest NVR channel for the Reolink camera set to ONVIF and the Reolink camera set to ONVIF?

 

[tung256]

Hi Tung256

Do you have both the Amcrest NVR channel for the Reolink camera set to ONVIF and the Reolink camera set to ONVIF?

i can set Amcrest to look for ONVIF as seen in the below. but in the reolink cam settings, there is no option to output onvif

 

[mat200]

i can set Amcrest to look for ONVIF as seen in the below. but in the reolink cam settings, there is no option to output onvif
View attachment 108134

Well, there's certainly a problem if Reolink can not do ONVIF ..