How to de-bricked hikvision 2332 and TFTP not work

[adderllyer]

Big Problem,

My 2332 IPCam bricked, and TFTP was blocked with "Device[192.0.0.64] test tftpserver". For this issue, how should to de-bricked the Camera, please let me know the method. thanks a lot!

 

[alastairstevenson]

What firmware version digicap.dav did you offer in the same directory as the TFTP server executable for the TFTP transfer, and what firmware version is printed on the camera label?
And how did you 'brick' it? By loading older firmware for a 2015 manufacture camera, or by changing some values in mtdblock5 or 6?
Are you using the TFTP server that says 'Hikvison TFTP server' in the title? That works best.

 

[adderllyer]

do as following as Thread http://www.ipcamtalk.com/showthread.php/3222-Hikvision-Checksum?p=27763#post27763 said:

HIKVISION 5.16 Full English including days of the weeks.

works with all 2cd2xxx models. Just flash with TFTP.

will work with some 5.2.8 models, if your 5.2.8 camera bricks just reflash back to 5.2.5 (this is not the firmware it's your Camera)

https://www.dropbox.com/s/k0jejxhyvn...5.1.6.rar?dl=0

no mtdblock5 or 6 change
chinese cam with label firmware: 5.2.8

5.1.6 with TFTP transfer
Step i did:
1. with TFTP transfer 5.1.6
2. cam bricked

Enjoy!

What firmware version digicap.dav did you offer in the same directory as the TFTP server executable for the TFTP transfer, and what firmware version is printed on the camera label?
And how did you 'brick' it? By loading older firmware for a 2015 manufacture camera, or by changing some values in mtdblock5 or 6?
Are you using the TFTP server that says 'Hikvison TFTP server' in the title? That works best.

 

[alastairstevenson]

Try this link from @whoslooking

Re: Bricked my DS-2CD2032-I from China, need 5.2.5 firmware? Someone please help.

well if you still haven't fix it look at my posts and you will find the correct 2.5 firmware to sort out your rebooting camera or Ill make this easy for you.

https://www.dropbox.com/sh/jdbjxlauk...r5whK4aFa?dl=0​

Extract the digicap.dav, place it in the folder where the TFTP executable is, and with your PC IP address set to 192.0.0.128 power on the camera.