morelup
Getting the hang of it
- Joined
- Oct 26, 2017
- Messages
- 50
- Reaction score
- 28
I am running a 5241-z12e that is getting inconsistent results at night, I've dialed it in as well as i think I can but hoping you all might be able to provide some better advice.
Probably 1/2-2/3 of the results i'm getting look like this
While 4 hours earlier I got this result
Here is a daylight picture so you can see the approximate zoom level i am using, one thing i've considered is pulling the zoom back a little bit more since i found i had better results at 1560 zoom level rather than max zoom
Here are the settings I am using
I found using any kind of backlight setting would result in any motion being a blur, while increasing the shutter speed any more than 1/4000 resulted in an image either too dark to see or too much gain and again washed out. Distance is probably ~100 feet from the locatio
Probably 1/2-2/3 of the results i'm getting look like this
While 4 hours earlier I got this result
Here is a daylight picture so you can see the approximate zoom level i am using, one thing i've considered is pulling the zoom back a little bit more since i found i had better results at 1560 zoom level rather than max zoom
Here are the settings I am using
I found using any kind of backlight setting would result in any motion being a blur, while increasing the shutter speed any more than 1/4000 resulted in an image either too dark to see or too much gain and again washed out. Distance is probably ~100 feet from the locatio
Attachments
-
107.8 KB Views: 8