Homeseer + Blue Iris can only send commands one way

ScratchStick

ScratchStick

n3wb
Feb 9, 2021
17
6
Norway
Im trying to get Homeseer and Blue Iris to talk to each other. As for now, im only getting Homeseer to talk to Blue Iris, but not the other way.
From Homeseer im able to trigger the camera to record, stop, move, and all that, and also change profiles.

But, the other way, I cant make it work. I want to be able to get motion alerts from BI to HS in order to make HS do something, and I want alerts if a camera freezes or somthing.

I have read a lot about Json, but I cant get that to work either....


Any advice ? :)
 
If in doubt...could install a MQTT broker for troubleshooting so you can see who is sending what. I use MQTT Explorer (unknown if it is the best or worse...but it works).
Have you set up the MQTT action for individual cameras under the ALERTS tab / ACTIONS on alert?
 
ScratchStick said:
Im trying to get Homeseer and Blue Iris to talk to each other. As for now, im only getting Homeseer to talk to Blue Iris, but not the other way.
From Homeseer im able to trigger the camera to record, stop, move, and all that, and also change profiles.

But, the other way, I cant make it work. I want to be able to get motion alerts from BI to HS in order to make HS do something, and I want alerts if a camera freezes or somthing.

I have read a lot about Json, but I cant get that to work either....


Any advice ? :)
Click to expand...

Discussed over on Homeseer forums.


Blue Iris V5 - HomeSeer Message Board

Hi, BI v5 is about to be released. Any idea if this plug in will be OK with the changes ?
forums.homeseer.com


Sent from my iPad using Tapatalk
 
I no longer user BI to HS for camera alerts but do have BI send HS alerts for camera watchdog events and also have BI send a watchdog type signal to HS every 10 minutes. That way HS knows BI is still alive.

I use HS events to control some cam actions in BI. HS knows when sprinkles are on on and i have one zone that sets of motion o one camera. So i turn off motion alerts when that zone is active.

Another is a gate leading to backyard. I trigger one camera every time gate opens. HS connects to Zwave gate sensor and triggers camera.


Sent from my iPad using Tapatalk
 
Serodgers said:
I no longer user BI to HS for camera alerts but do have BI send HS alerts for camera watchdog events and also have BI send a watchdog type signal to HS every 10 minutes. That way HS knows BI is still alive.

I use HS events to control some cam actions in BI. HS knows when sprinkles are on on and i have one zone that sets of motion o one camera. So i turn off motion alerts when that zone is active.

Another is a gate leading to backyard. I trigger one camera every time gate opens. HS connects to Zwave gate sensor and triggers camera.


Sent from my iPad using Tapatalk
Click to expand...
z-wave gate sensor? can explain a tad more?
 
Regular Zwave sensor fitted with a external wide gap sensor in water proof box. Have two of these for my gates.IMG_6505.jpg


Sent from my iPhone using Tapatalk
 
Zwave sensor



Wide gap sensor


Seco-Larm SM-216Q/BR Wide Gap Magnetic Contact, Brown - Door Contact Sensors - Amazon.com

Seco-Larm SM-216Q/BR Wide Gap Magnetic Contact, Brown - Door Contact Sensors - Amazon.com
www.amazon.com

Waterproof box


uxcell 3.9 inches x 2.67 inches x 2 inches 100mmx68mmx50mm ABS Junction Box Universal Electric Project Enclosure w Mounting Fixed Hole - - Amazon.com

uxcell 3.9 inches x 2.67 inches x 2 inches 100mmx68mmx50mm ABS Junction Box Universal Electric Project Enclosure w Mounting Fixed Hole - - Amazon.com
www.amazon.com

Painted box white to match vinyl fence and gate. Works great. HS sends BI camera trigger URLto record when sensor opens.


Sent from my iPhone using Tapatalk
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
You must log in or register to reply here.
Top Bottom