Hikvision NVR just connected to un-managed switch

C

Carlos1001

n3wb
Jul 22, 2019
2
0
yorkshire
Hi all

I’m going to be doing an install of 17 IP Cameras in a 32 channel NVR but the hotel we are installing on has a locked down network so still waiting on their IT to provision us a VLAN

My question might be a novice question but it’s the 1st time I have come up
Against it.

I Have a PoE switch to handle
All the cams, if I connect this to the cams and NVR without plugging the switch into a router or “dedicated VLAN switch” having set all the cams and NVR on a static IP address - will I be able to see and manage the cams through the NVR HDMI output (strictly as a temp basis until the IT for this place pulls their finger out !)

I understand all this would be local
For the time being

Thanks in advance


The system is all Hikvision
 
Carlos1001 said:
I Have a PoE switch to handle
All the cams, if I connect this to the cams and NVR without plugging the switch into a router or “dedicated VLAN switch” having set all the cams and NVR on a static IP address - will I be able to see and manage the cams through the NVR HDMI output (strictly as a temp basis until the IT for this place pulls their finger out !)
Click to expand...
Yes, that would work OK - assuming that your camera IP addresses and the NVR IP address and the camera IP address configurations in the NVR match up.
 
You must log in or register to reply here.
Top Bottom