Hikvision NVR DS7108-SN/P PoE questions on connections

B

BertSteenbergen

n3wb
Jan 24, 2016
13
0
Utrecht area NL
Dear all,

I want to change my set up involving a new NVR and new cameras (replacing Vivotek Cameras and a Koukaam NVR).
I bought the Hikvision DS7108 SN/P, so with 8 PoE Ethernet ports. I have following questions
  1. Can I also connect camera's that are not directly connected to the NVR but are coupled to the router via a switch and then the NVR coupled either via the same switch or to the Modem/Router
  2. I have for practical reasons currently one camera connected via a Devolo powerline adapter, This actually should stay like tat, is that possible or not?
  3. I have one internal small Pan and Tilt dome that currently is connected wirelessly to my home network (using OnViF protocol), can I "connect" this camera to my new Hikvision NVR?
Your help to this Newby will be highly appreciated and maybe they are of help to others as well.

Greetings from the Netherlands,

Bert
 
Last edited by a moderator:
Hi Bert,

I'm playing around with a Hikvision NVR at the moment and have exact the same questions. It would be very helpful to learn from somebody versible to this issues.
 
You must log in or register to reply here.
Top Bottom