just add the cams to the nvr poe ports then it should set them up auto
I am having trouble setting the Motion Detection events. I keep getting a "Parameter Error" when i try to apply settings on one of my cams. Another camera of the same model and firmware works fine.
I can't seem to work out how to sync the motion detection mask on the NVR and the camera. If I set it on the NVR I find it does not apply to the camera. If I set the mask in the camera, it does not apply to the NVR.
Done all the usual reboots, defaulting cams and NVR, updated camera firmware, re-installed Webcomponents, tried different computer, only using Internet Explorer. Nothing seems to work properly.
I had previously PCNVR4200 and never had these issues. Starting to wonder if NVR firmware is the problem hence why I asked if it can be rolled back.