I have a Hikvision NVR DS-7608NI-K2/8P with four Hikvision cameras DS-2CD2085FWD-I. Everything worked great for about four years and then one of the cameras quit.
After many hours of trial and error, I finally got it to work again by adding a separate 12V power source to the pigtail. i.e. It would no longer work with the POE from the NVR.
Is it possible this condition might in some way be reset or is the internal POE power supply damaged?
Thanks
After many hours of trial and error, I finally got it to work again by adding a separate 12V power source to the pigtail. i.e. It would no longer work with the POE from the NVR.
Is it possible this condition might in some way be reset or is the internal POE power supply damaged?
Thanks